KANA - painting tools

TIPS&ADVICES

CQ foil EFFECT ROLLERS MAGIC GUN MASKING TAPES KANA tint pigments PAINTBRUSHES PAINTROLLERS Easy Joint	EasyJoint Repair Paint Contents of package: • EasyJoint 100 ml • Sponge • Syringe • User Manual Use: Designed for the restoration of old, dirty joints between glazed wall tiles, floor tiles and mozaics with glazed or other non-porous finishes. EasyJoint is suitable for use in bathrooms, toilets, kitchens, shower rooms, swimming pools, etc. Outdoor use possible. With EasyJoint, you can change the colour of joints by adding KANA Pigment (available in 24 colour shades) into the white EasyJoint. Application: Clean and degrease the surface of joints (especially in kitchen). Let the clean joints dry. Before use, properly shake the bottle with the preparation; put the sponge attachment on the joint and gently press the bottle (try the preparation on a smooth and clean surface before the first application of EasyJoint). Coat the joints in parts - approx. 1 sq metre of tiling - and let the preparation work for about 30 minutes. A longer time may cause difficulties with the removal of the preparation from tiles. After 30 minutes, remove excessive material from tiling by the coarse side of the sponge (included in the package). The preparation will gain full hardness after 48 hours. KANA Pigment Colouring White EasyJoint can be easily coloured by KANA Pigment. Remove the sponge attachment and add the pigment. We recommend dosing KANA Pigment by the included syringe. Properly shake the bottle of EasyJoint with added KANA Pigment (for at least 1 minute). Try EasyJoint before you use it. We recommend two colour shades: pastel shade created by adding 5 ml of KANA Pigment and dark shade created by adding 10 ml. Higher concentrations of the pigment are not recommended. Consumption: Approximately 10 - 14 sq metres depending on joint width and tiling format. Shelf life: 18 months. The date of manufacture is on the bottom of the package. CERTIFICATES ISO 9001:2000 Certified








	Clean and degrease the surface. Allow the joints to dry up well.
	Vigorously shake the bottle before use.
	If you wish to restore joints with white colour, proceed to point eight. If you wish to use a different colour with KANApigment, start with removing the cap with sponge.
	Pull a required amount of KANApigment into the supplied syringe. You will find a colour card on the packaging.
	Inject the KANApigment into a bottle containing the EasyJoint (watch for overfilling).
	Carefully close the bottle.
	Vigorously shake the EasyJoint with the KANApigment – at least one minute.
	Place the sponge on the joint and squeeze the bottle slightly.
	Allow the EasyJoint to take effect for about thirty minutes and then remove remains of the substance from the tiles with an abrasive side of the sponge (supplied with the set). The substance will harden up after approximately 48 hours.